+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
- ♥【What You Get】Each package With 2 mini bag of thermal grease which apply on the back of the SSR to make the temperature dissipate faster.
- ♥ Product Name: solid state module relay SSR-25DA, 3-32VDC/24-480VAC ; Current & Frequency:25A,50/60Hz.
- ♥ Total size (approximate):58 x 45 x 32mm/2.3" x 1.8" x 1.26" (l*w*t); Net weight:116g; Material:metal, plastic, electronic parts.
- ♥ SSR Application: with a switch no spark, no noise,high switching speed,anti-corrosion,moisture-proof,anti-vibration,long life.high reliability,electromagnetic compatibility and other characteristics.
- ♥ Solid state relay ideal for automatic process control application, a must component for temperature controller and other machinery control system.
Product description
Think more than others
Each package with 2 mini bag of thermal grease which apply on the back of the SSR to make the temperature dissipate faster.
Steps are as follows:
1.Wipe the back of the SSR clean to remove the dust.
2.Squeeze some thermal grease on the SSR back.
3.Use the brush to spread the thermal grease.
4.Apply thermal grease evenly.
Single Phase Solid State Relay with LED indicator
DC to AC/Input 3-32VDC To Output 24-480VAC /Maximum Current 25A
SSR series solid state relays (screw terminal connection) are of high strength, impact resistance and strong vibration resistance, with low requirement for input current. They can be easily connected with digital control circuits of computers. . They are updated products of AC and DC contactors. They are specially designed for harsh environments with corrosion, humidity or light-proof/explosion-proof requirements and frequent turn-on/off requirements.
- The current on the product is the maximum load current, not the rated current.
How to choose correctly
STEP 1: Choose a correct type Current of Equipment/Ratio = Current of SSR PS: The Ratio depend on the kind of your loading equipment. Resistive load :70%, Inductive load:20%,Capacitive load：10%.
STEP 2: Choose a suitable heat sink During the useage of SSR, it will give out a lot of heat, so in order to extend the life of your SSR, please install a heat sink , also if the current is over 60A,the cooling fan also required. PS: Our Heat Sink include 2 screws (for install heat sink) and a pack of thermal compound (is applied to the bottom of the SSR)
| General | |
| Brand | CGELE |
| Item model number | DC to AC 25A with Heat Sink |
| Item Weight | 6.8 ounces |
| Package Dimensions | 3.78 x 3.62 x 2.4 inches |
| Manufacturer | CGELE |
| ASIN | B09GLRRGLT |
| Date First Available | August 26, 2020 |
| Connector Type | Screw |
| UPC | 781017976693 |
| Material | epoxy |
| Operation Mode | Automatic |
| Current Rating | 25 Amps |
| Contact Type | Normally Open |
| Lower Temperature Rating | 20 Degrees Celsius |
| Part Number | DC to AC 25A with Heat Sink |
| Size | DC to AC 25A with Heat Sink |
| Batteries Required? | No |
| Batteries Included? | No |
| Mounting Type | Surface Mount |
| Specification Met | CE |
| Coil Voltage | 332 Volts (DC) |
| Contact Current Rating | 25 Amps |
| Maximum Switching Current | 25 Amps |
| Minimum Switching Voltage | 3 Volts (DC) |
| Measurement System | Metric |
