In Stock
10 reviews
$9.99
-
+
  • Brand: CHANZON
  • Product Code: B07LF7N5K9

  • These double side (DS) pcbs with plated through holes design, Each hole on the same side are electrically isolated (NOT a stripboard or sigle side) solderable, You can solder to bridging holes together or use 22-29awg jumper wires for connection. Isolate points bare Pre-tined perfboard.
  • Lettering on both side of the PC board makes it easier for prototyping projects, Cuttable fiber glass and FR-4 flame resistant good for soldering,Muti Pins, easy to cut and solder with appropriate tools. Flux for easy soldering and extended serving life of printed blank plating thru perforated board.
  • Kits : 34pcs set ( 8pcs 4x6 / 8pcs 3x7 / 8pcs 5x7 / 8pcs 2x8 / 2pcs 7x9 ) 2*8 3*7 4*6 5*7 7*9 CM protoboard | Hole-diameter: 1 mm / 0.04 inches | Hole-pitch point: 2.54mm / 0.1 inches | Conner Mounting-Hole: 2 mm / 0.08 inch (7x9cm board 3.7mm)| Thickness: 1.6mm / 0.06 inch
  • Work with: sodering welding led diode, screw terminal, dupont wire, connector, resistor, IC, DIP, sensors, transistor and other eletronic power components or devices with .1" pin spacing. For Hobby Test, Computer Science Class experiments, point-to-point DIY IoT projects,Raspberry rasp Pi connection Perf Board.
  • WARRANTY AND CUSTOMER SERVICE - We provide 1 year warranty for this pcs circuits perf boards, Our Customer service team is ready for income request 24x7. 4 X 6CM 280 holes 3 X 7CM 240 holes 5 X 7CM 432 holes 2 X 8CM 168 holes 7 X 9CM 806 holes Hole-pitch: 2.54 mm / 0.1 inches 1.6 mm total 34 pieces

Product description

Chanzon high quality universal print DS perf boards

4 distinguish points

  1. One package contain 34 pcs with 5 different sizes, Meeting different needs(large or small projects).
  2. Pre-tined through each holes for a premium connection.
  3. Glass fiber + FR4 flame resistant, safe for soldering/welding.
  4. Well packaged with clear bag. Sizes information on bag.

  • widely used among electronic experiments and point-to-point DIY IoT projects. Pre-tined plating thru holes design for easy installation of DIP, sensors, transistor and other component. Glass fiber material FR-4 flame resistant safe for soldering/welding.
  • Each pcbs with 4 larger solderable holes(diameter approx 2.25mm) on the corners allowing easy attachment of medium sized wire.
  • 34 pieces for general use.

Product Specification:

  • Holes: Pre-tinned
  • Dimension: 4x6/ 3x7/ 5x7/ 2x8/ 7x9 CM
  • Quantity: 34 pieces in total of 5 different sizes
  • Thickness: about 1.6mm
  • Hole-pitch: 2.54 mm / 0.1 inches
  • Hole-diameter: 1 mm / 0.039 inches
  • Material: glass fiber FR-4
  • Color: Green

Package:

  • 8pcs 4 X 6CM double-sided PCB board with 280 holes
  • 8pcs 3 X 7CM double-sided PCB board with 240 holes
  • 8pcs 5 X 7CM double-sided PCB board with 432 holes
  • 8pcs 2 X 8CM double-sided PCB board with 168 holes
  • 2pcs 7 X 9CM double-sided PCB board with 806 holes

General
Date First Available ‏ ‎ December 17, 2018
Manufacturer ‏ ‎ CHANZON
ASIN ‏ ‎ B07LF7N5K9
Product Dimensions ‏ ‎ 6.3 x 5.51 x 0.71 inches; 8.47 ounces
Item model number ‏ ‎ 34PCB-LYB--KIT1
Is Discontinued By Manufacturer ‏ ‎ No

Write a review

Note: HTML is not translated!
Bad           Good