+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
- 【164ft/50m Long Range】The volume is small and the performance is stable and reliable, high receive sensitivity, Signal can pass through walls, floors and doors. Max range is up to 164ft/50m with no obstacle.
- 【Wide Application】Designed for control a wide variety of electronic devices with a wireless signal. WIDE range of APPLICATIONS from simple domestic remote control to autonomous control such as, Great for camper LED flood lights, remote trigger for a flame puffer ,entrance, Garage Doors, alarm system, lifting equipment and so on.
- 【4CH for More Control & Security 】Adjustable working way, on/off. Switch Momentary / Toggle / Latched. All remote control switch kits support 433mhz frequency. Learning code has high-level security for its low repetitive rate and re-learn mode, by which it can delete the old code and re-learn a new code when a remote control get lost, so you are always in control of it.
- 【Easy & Flexible】Extremely easy to setup, learn, relearn and control(please refer to details). 4 independent relay channels can either work together (In Toggle) for polarity reversing or individually (Momentary / Latched) to control different electronics. The IC storage capacity on the receiver is limited. Only 20 remote controllers can be stored.
- 【Package Includes】Comes with 2 Pcs 4 Button Transmitters and 1 Pcs 4CH receiver. NOTE: Mounting holes and screws are provided for easy installation to walls etc. Please email us if you meet any problem, we are always here to help, thanks!
Product description
Working mode:1.Momentary mode 2.Toggle mode3. Latching mode
Updated Version :DC 5–60V Motor Forward/Reverse Remote Control Switch
Latching: applied to rolling doors, telescopic doors, etc., can be used with a 3-key remote control, using the latching mode, 1 key controls forward rotation, another key controls reverse rotation, and the other key no need to be pairing code, press it to pause the device.
DC 12V 4 Channel Remote Control Switch
Toggle:One remote control button controls one relay.
The load end can be connected to 4 lamps or two motors.
A total of 7 working modes:
Momentary Mode
Toggle Mode
Latched Mode
2CH Momentary + 2CH Toggle
2CH Momentary + 2CH Latched
2CH Toggle + 2CH Latched
2CH Latched + 2CH Latched
AC 85~220V 2 Channel Remote Control Switch
Momentary: If work with a 2-button remote control, use the momentary mode, generally used to control switch, 2 channels can control 2 switches, but this situation is rare; It can also be used for motor equipment, rolling doors, curtains, etc. With a 2-button remote control, one button controls the forward rotation of the motor, and one button controls the reverse rotation of the motor. Release the remote control button and the device will stop.
DC 6V~30V 2 Channel Remote Control Switch
Latching: applied to rolling doors, telescopic doors, etc., can be used with a 3-key remote control, using the latching mode, 1 key controls forward rotation, another key controls reverse rotation, and the other key no need to be pairing code, press it to pause the device. The same goes for the remote control with 4 keys. The other 2 keys no need to be pairing code, press any of the keys will stop the device from working.
When you receive the product, please select one of the following modes for pairing before use.
Product Model Description(1202 2202 2402)
2CH Momentary Mode:
Step 1, press the button on the receiver board once
Step 2, press the A button, then the light of the receiver board will flash.
Step 3, Wait for the blinking to finish, then press another button B. The receiver board will blink again.
After pairing is complete, long press A button to control forward rotation and long press B button to control reverse rotation.
2CH Toggle mode:
Step 1, press the button on the receiver board twice.
Step 2, press the A button, then the light on the receiver board will blink.
Step 3, wait for the blinking to end, then press the B button once more, and the receiver board will blink again.
After the pairing is finished, short press the A button to control forward rotation and short press the B button to control reverse rotation. Short press the A/B button again, the motor will stop forward/reverse rotation.
2CH Latched mode:
Step 1, press the button on the receiver board three times.
Step 2, press the A button, then the light on the receiver board will blink.
Step 3, wait for the blinking to end, then press the B button once more, and the receiver board will blink again.
After the pairing is finished, short press A button to control forward rotation and short press B button to control reverse rotation. Press A+B button together, the motor stops rotating. You can also use other individual buttons to stop the rotation (except for the paired A and B buttons)
KR1202 + 2KT09(Updated:DC 5~60V 2CH)
Non-dry contact relay (M1 M2)
Contact Circuit Power Supply
Contact circuit is already energized
Wiring Method
Simpler wiring; ready for direct use
Flexibility
Low; constrained by internal circuit design
KR1204+2KT06(DC 12V 4-CH Remote Control Switch)
Dry contact relay (NO COM NC)
Contact Circuit Power Supply
Contact circuit is not energized; external power supply required.
Wiring Method
Requires additional wiring for power supply.
Flexibility
High, adaptable to various voltages/loads.
Dry contact relay (NO COM NC)
Dry contact relay (NO COM NC)
KR2202+4KT05(AC 85~220V 2-CH Remote Control Switch)
Dry contact relay (NO COM NC)
Contact Circuit Power Supply
Contact circuit is not energized; external power supply required.
Wiring Method
Requires additional wiring for power supply.
Flexibility
High, adaptable to various voltages/loads.
Dry contact relay (NO COM NC)
Dry contact relay (NO COM NC)
Dry contact relay (NO COM NC)
KR2402A+2KT06(DC 6V~30V 2-CH Remote Control Switch)
Dry contact relay (NO COM NC)
Contact Circuit Power Supply
Contact circuit is not energized; external power supply required.
Wiring Method
Requires additional wiring for power supply.
Flexibility
High, adaptable to various voltages/loads.
Dry contact relay (NO COM NC)
Dry contact relay (NO COM NC)
Dry contact relay (NO COM NC)
| General | |
| Brand | QIACHIP |
| Item Weight | 0.035 ounces |
| Package Dimensions | 5.5 x 3.4 x 1.2 inches |
| Manufacturer | QIACHIP |
| ASIN | B082XMYBM7 |
| Date First Available | December 19, 2019 |
| Batteries | 2 CR2032 batteries required. |
| Connector Type | Screw |
| Operation Mode | Automatic |
| Current Rating | 10 Amps |
| Contact Type | Normally Open |
| Wattage | 6 Milliwatts |
| Mounting Type | Wall Mount |
| Coil Voltage | 12 Volts |
| Contact Current Rating | 10 Amps |
| Maximum Switching Current | 10 Amps |
| Maximum Switching Voltage | 12 Volts |
| Minimum Switching Voltage | 12 Volts |
