+
+
+
+
+
+
+
+
+
+
+
+
+
+
- 24V Relay Module: Working Voltage: DC24V; Maximum Load: AC 250V/10A, DC 30V/10A; Trigger Current of Opto-Isolator: 5mA
- Fault-Tolerant Design: Fault Tolerant Design, Even if the Control Line is Broken, the Relay will not Operate;All Interfaces of Relay can be Wired Out Through the Terminals Directly,Normally Open and Normally Closed
- Optocoupler Isolation:1 Channel Relay Board use Optocoupler Isolation that has Strong Driving Ability and Stable Performance ,The Isolation Circuit Prevent Damages to I / O Port by Relay Switch Current
- Jumper Design: The Relay Module has a Jumper That You Can Set Rather the Unit State Changes with High or Low Signal. Has Screw Terminals for Relay (NC,C,NO) and for Input; Coil +, Coil - and Trigger
- Wide Application: DC 24V Relay Module Works Well with ARM /PIC /AVR /MCU/Raspberry/CNC Machine/ PS4 etc.
Product description
DC 24V Relay Module:
Specification:
- Channel: 1 Channel
- Working Voltage: DC 24V
- Trigger Current: 5mA
- Trigger Voltage(LOW): 0 - 4V
- Trigger Voltage(HIGH): 4.5 - 24V
- Insulation Resistance: 100MΩ (500VDC)
- Normally Opened Compatible Load: 10A 250VAC / 15A 125VAC / 10A 30VDC
Package Contents:
10x 1 Channel Relay Module DC 24V
Features:
- Action Time (Under Rated Voltage): Less Than 10ms
- Release Time (Under Rated Voltage): Less Than 5ms
- Power Indicator (Green), Relay Status Indicator (Red)
- User Friendly Interface Design. All Interfaces Can Be Connected Via Terminal Wiring Leads Directly
Output Interface:
- Normally Opened (NO) : Normally Open Pin of Relay. NO Pin is Not Connect to COM Pin When Relay Off. NO Pin is Connect to COM Pin When Relay On
- Common Pin (COM) : Common Pin of the Relay
- Normally Closed (NC) : Normally Close Pin of Relay. NC Pin is Connect to COM Pin When Relay Off. NC Pin is Not Connect to COM Pin When Relay On
Input Interface:
- DC+: Connect to Power Positive (According to the Relay Voltage Range)
- DC-: Connect to Power Negative
- IN: Relay Module Trigger Pin (High or Low Level Trigger Optional)
High or Low Level Trigger Select:
1. Use High Level Trigger
- When ¡°IN¡± input High Level Signal, the ¡°NO¡± connect with ¡±COM¡±
- When ¡°IN¡± input Low Level Signal, the ¡°NC¡± connect with ¡°COM¡±
2. Use Low Level Trigger
- When ¡°IN¡± input Low Level Signal, the ¡°NO¡± connect with ¡±COM¡±
- When ¡°IN¡± input High Level Signal, the ¡°NC
| General | |
| Package Dimensions | 5.12 x 3.15 x 0.98 inches; 2.5 ounces |
| Date First Available | November 22, 2021 |
| Manufacturer | AEDIKO |
| ASIN | B09J4BMHDQ |
| Item model number | AE14921a |
